|
|
All Noise Control Audio speakers use Neutrik NL4 connectors. Supplied and racked in your preference.
|
FF8.0
The FF8.0 is a 8000 Watts dual redundant power amplifier. It has two totally independent power supplies with individual 10A mains IEC inlets and fusing.
The FF8.0 Amplifier uses Switch Mode Power Supply Technology coupled with a Class D PWM output stage, resulting in a very efficient, lightweight and powerful amplifier. It is ideal for all professional audio applications, from nightclub installations to touring sound systems. The FF8.0 is ideally suitable for driving 2 ohm loads in the most demanding environments.
|
|
• Weight 12kg
• 2 x 10A power supply
• Built in clip limiter
• Built in thermal headroom
• 100% aluminium casing
• Aluminium extruded front panel
• High current Neutrik speak-on all poles connected 1+, 1-, 2+, 2-
• Dual redundancy
• Soft start, full in-rush protection
• 4 year warranty features
|
 |
FF6.0
The FF6.0 is a 6000 Watts dual mono power amplifier. It has two totally independent power supplies with individual 10A mains IEC inlets and fusing.
The FF6.0 Amplifier uses Switch Mode Power Supply Technology coupled with a Class D PWM output stage, resulting in a very efficient, lightweight and powerful amplifier. It is ideal for all professional audio applications, from nightclub installations to touring sound systems. The FF6.0 is ideally suitable for driving 2 ohm loads in the most demanding environments.
|
|
• Weight 12kg
• 2 x 10A power supply
• Built in clip limiter
• Built in thermal headroom
• 100% aluminium casing
• Aluminium extruded front panel
• High current Neutrik speak-on all poles connected 1+, 1-, 2+, 2-
• Dual redundancy
• Soft start, full in-rush protection
• 4 year warranty features
|
|
FF3.6
The FF3.6 is a 3600Watts power amplifier. It has one totally independent power supply with individual 10A mains IEC inlets and fusing.
The FF3.6 Amplifier uses Switch Mode Power Supply Technology coupled with a Class D PWM output stage, resulting in a very efficient, lightweight and powerful amplifier. It is ideal for all professional audio applications, from nightclub installations to touring sound systems. The FF3.6 is ideally suitable for driving 2 ohm loads in the most demanding environments.
|
|
• Weight 12kg
• 1 x 13A power supply
• Built in clip limiter
• Built in thermal headroom
• 100% aluminium casing
• Aluminium extruded front panel
• High current Neutrik speak-on all poles connected 1+, 1-, 2+, 2-
• Dual redundancy
• Soft start, full in-rush protection
• 4 year warranty features
|
|
SPEAKER MANAGEMENT
FF204D
The Noise Control Audio Speaker Management Systems (FF204/206D) are high performance, easy to use signal processors for loudspeaker systems, providing processing for stereo 3-way, mono 6-way(FF206D) and stereo 2-way, mono 4-way (FF204D) configurations.
The units provide generous amounts of signal processing capability and a wide variety of crossover shapes. The systems are complemented by highly flexible preset arrangements. The units may be controlled just as comprehensively from thier front panel, or by using the PodWare software application. PodWare can operate a single unit, or can optionally control a multi-km network of products using the BvNET networking standard.
|
|
• Two input channels
• Four or Six output channels
• High quality 96kHz 24Bit audio processing
• Easy to use
• Proven reliability
• PC control from PodWare
• BvNET networking option
|
QSC PLX 3402
• 1100 watts per channel / 4 ohm clip limiting
• High power
• Lightweight
|
 |
QSC PLX 2402
• 700 watts per channel / 4 ohm clip limiting
• High power
• Lightweight
|
|
AMP RACKS
2 x FF8.0
2 x FF6.0
1 x FF3.6
2 x FF204D
|
 |
MONITOR RACK
2 x QSC PLX 2402
2 x QSC PLX 3402
1 x QSC PL6.0
2 x BBS FDS – 360 Crossover
|
|
|
